dichroic glass
DICHROIC.US
TO GLASS BLOWERS AROUND THE WORLD available IN
DICHROIC HOT GLASS
BOROSILICATE COE 33
COMPATIBLE
WITH BOROFLOAT SIMAX KIMAX DURAN PYREX NORTHSTAR GLASS ALCHEMY,
AND OTHER HIGH QUALITY
33 COE GLASS
NOT COMPATIBLE
WITH SOFT GLASS WHICH INCLUDES COE 90, COE 96, COE 104, OR
COE 84-87(COMMONLY KNOWN AS FLOAT GLASS OR WINDOW PANE GLASS)
1/2 lb dichroic scrap
glass
CREDIT CARD ORDERS WELCOME
jim@dichroic.us
OR
PAYPAL
BUY IT NOW
|
|
Price per 1/2 pound $15.00 + shipping
|
|
OR you can buy a
1 LB DICHROIC GLASS
|
|
10 lb dichroic scrap glass
 YOU GET 10 BAGS |
 YOU GET 10 BAGS |
CALL 1-541-342-6411
OR EMAIL
175 DAVIS STREET
EUGENE, OR 97402
description of 2 lb bag
YOU
DICHROIC HOT GLASS
BOROSILICATE COE 33
COMPATIBLE
WITH BOROFLOAT
SIMAX KIMAX DURAN PYREX
NORTHSTAR GLASS ALCHEMY,
AND OTHER HIGH QUALITY
33 COE GLASS
NOT COMPATIBLE
WITH SOFT GLASS
WHICH INCLUDES COE 90, COE 96, COE 104, OR
COE 84-87(COMMONLY KNOWN AS FLOAT GLASS OR WINDOW PANE GLASS)
YOU WILL HAVE FUN WITH THIS DICHROIC GLASS WITH A THIN THICKNESS OF ABOUT 1.4 MM. MOSTLY LARGE PIECES 1/2-4 INCHES.
OF MULTICOLORED AND ASSORTED DICHROIC SCRAP SHEET GLASS. IF YOU NEED A BAG RIGHT NOW YOU WILL FIND IT AT !!!! dichroic.us !!! ... I HAVE SEVERAL VIEWS OF AN ACTUAL BAG FROM DIFFERENT ANGLES AND IN DIFFERENT LIGHT. THE BAG YOU GET WILL BE FROM THE SAME BOX AND ALMOST IDENTICAL TO THE ONES SHOWN,
PLEASE FEEL FREE TO RETURN ANY BAG THAT YOU ARE NOT SATISFIED WITH.. (JIM)
THIS IS PREMIUM QUALITY GLASS FOR GLASS BLOWING ( COE APPROXIMATELY 32-34).
FOR THOSE OF YOU WHO WANT TO FUSE OR ARE FUSING
A KILN TEMPERATURE OF ABOUT 1725 DEGREES F IS A GOOD STARTING POINT.
CHECK OUT THIS BASIC FUSING AND SLUMPING TUTORIAL
Copy and paste the url here to begin the "Complete Basic Fusing and Slumping tutorial."
http://www.warmglass.com/basic.htm
THIS HIGH QUALITY BOROSILICATE GLASS IS COMPATIBLE WITH ALL OTHER COE 33 BOROSILICATES, BOROFLOAT, PYREX, SIMAX, KIMAX, DURAN, AND ALL BOROSILICATE GLASS AND ALL OTHER TYPES OF HOT GLASS.
THIS 12 INCH ZIPLOCK BAG, AS SHOWN IN THE PICTURES, YOU WILL GET ONE VERY SIMILAR AND IT WILL CONTAIN A WIDE ASSORTMENT OF SPECIALLY SELECTED COLORS AND SIZES, THESE ARE REAL COLORS, THERE IS ALWAYS A LITTLE EXTRA TO MAKE UP FOR ANY WASTE.
NOTE::: NOT LIKE A LOT OF THE NEW SHEETS OF DICHROIC WHICH COME IN THREE COLORS [CYAN, MAGENTA AND YELLOW] OR WHAT THEY CALL "CMY" WITH "CMY" YOU COMBINE THE DICHROIC TO MAKE A VARIETY OF COLORS.
(THERE ARE LOTS OF LARGER PIECES IN THIS BAG).
THE COLORS HAVE BEEN SELECTED TO GIVE YOU THE WHOLE RANGE OF OUR STOCK, WHICH RANGES THROUGH THE SPECTRUM FROM RED TO BLUE TO GREEN TO YELLOW, PURPLE, ORANGE, MAGENTA, ETC...
THERE ARE SOME SMALL PIECES VERY LITTLE BY WEIGHT. THE PIECES VARY IN SIZE THE LARGEST ARE AROUND FIVE INCHES AND THE SMALLEST IS ABOUT THE SIZE OF A DIME WITH HARDLY ANY GLASS DUST.
I HAVE SOLD HUNDREDS OF BAGS WITH NO COMPLAINTS. GLASSBLOWERS USE THIS DICHRO GLASS FOR MAKING MARBLES, GLASS BEADS, FLAMEWORK, LAMPWORK, FUSING. BEAD MAKERS AND FUSERS USE THIS 33 COE DICHROIC GLASS FOR BEADMAKING, SCULPTURES AND OTHER FUSED GLASS ITEMS. THIS DICHROIC BOROSILICATE CAN BE USED WITH BETHLEHEM TORCHES CARLISLE BURNERS AND ALL OTHER MAJOR BRANDS OF BURNERS. FLAMEWORKERS AND LAMPWORKERS USE THIS BOROSILICATE GLASS TO MAKE FLAME WORK AND LAMP WORK SCULPTURE.
one way to use Dichroic pieces:
Attach a punty to end of a piece of dichro, heat dichro on the glass side – not the dichro film side.
you will see a thin edge when looking from the glass side.
Take a thin rod 6 or 7mm that will heat up easily.
Rake clear or colored glass onto the back of the piece being careful not to let the flame touch the dichro.
Use a high oxy flame to encase work out in the flare where the flame is cooler.
Attach another punty to other side and stretch dichro only a little or none at all. The dichro is now ready to use for inside out design, cane builds, or outside design.
YOU ARE LIMITED ONLY BY YOUR IMAGINATIONS ON USES FOR THIS GLASS.
