GLASS LATHE

modle kk manufactured specificaly large bore 7 7/8 xtra chucks xtra burners xtra manifold, HUGE LATHE WEIGHS 4600LB CRATED. IT IS READY TO PLUG IN. WILL ARRANGE SHIPPING.

sold $35,000	sold $35,000 this 1996 litton lathe is in excellent condition and has very little use it is completely computerized all computer parts are included. A STEAL AT OUR our price is $35,000 plus shipping. new this lathe is $130,000 LITTON FLOOR EE 255 GLASS WORKING LATHE Like new Preform EE 255 Fiber Optic or glass blowing lathe, 9010-063-111, S/N 815 made on June 24, 1996. Just purchased from a 3M plant that closed. Machine shows little wear and is equipped with a computer. (See pictures) Options: Precision alignment, infinitely variable-speed belt drive 5-100 RPM, Center to Center 100 ¼” or 2546mm, bed to center height is 13 ¾” or 349mm, hole in spindles 3 7/8” or 98mm, spindle on / off speed direction controls, jog button, lathe bed scales, seals on lathe spindles that makes it possible to apply air pressure to the work, Fire carriage, rotary cock valve with volume control, gas/oxy proportioned and spindle air control, machine has like new scroll chuck and 3 jaw planetary faceplate, a vacuum pump is included. I am not a Litton Rep and I'm selling as-is, but they look like brand new and it is in perfect working condition ! I've been told the chuck package per machine cost is $8200.00 and the computer is $8,000.00 new.	sold

WE ARE EXPERIENCED IN SUPPLYING EQUIPMENT FOR GLASS - FLAMEWORKING - LAMPWORKING STUDIOS

ONSITE DEVELOPMENT AND CONSULTATION FOR ALL TYPES OF ARTISTIC AND INDUSTRIAL GLASS SHOPS

WE HAVE LOTS OF OTHER EQUIPMENT AVAILABLE THAT IS NOT PICTURED HERE PLEASE E MAIL FOR MORE INFORMATION

WE FACILITATE NATIONAL AND INTERNATIONAL STUDIO SET UP AND RECONFIGURATION we have experienced and references

YOU WILL HAVE FUN WITH THIS DICHROIC GLASS WITH A THICKNESS OF ABOUT 1.4 MM. MOSTLY LARGE PIECES 1-4 INCHES. THIS AUCTION IS FOR ONE “TWO POUND BAG” OF MULTICOLORED AND ASSORTED DICHROIC SCRAP SHEET GLASS. I HAVE SEVERAL VIEWS OF AN ACTUAL BAG FROM DIFFERENT ANGLES AND IN DIFFERENT LIGHT. THE BAG YOU GET WILL BE FROM THE SAME BOX AND ALMOST IDENTICAL TO THE ONES SHOWN, PLEASE FEEL FREE TO RETURN ANY BAG. (JIM) THIS IS PREMIUM QUALITY GLASS FOR GLASS BLOWING ( COE APPROXIMATELY 32-34). THIS GLASS IS COMPATIBLE WITH THESE BOROSILICATES PYREX, SIMAX, KIMAX, DURAN, AND ALL BOROSILICATE GLASS AND ALL OTHER TYPES OF HOT GLASS. THIS 12 INCH ZIPLOCK BAG, AS SHOWN IN THE PICTURES, CONTAIN A WIDE ASSORTMENT OF RANDOM COLORS AND SIZES, THESE ARE REAL COLORS, NOTE::: NOT LIKE A LOT OF THE NEW SHEETS OF DICHROIC WHICH COME IN THREE COLORS [CYAN, MAGENTA AND YELLOW] OR WHAT THEY CALL "CMY" WITH "CMY" YOU COMBINE THE DICHROIC TO MAKE A VARIETY OF COLORS. (THERE ARE LOTS OF LARGER PIECES IN THIS BAG). THE COLORS RANGE THROUGH THE SPECTRUM FROM RED TO BLUE TO GREEN TO YELLOW ETC... THERE ARE SOME SMALL PIECES VERY LITTLE BY WEIGHT. THE PIECES VARY IN SIZE THE LARGEST ARE AROUND FIVE INCHES AND THE SMALLEST IS ABOUT THE SIZE OF A DIME WITH HARDLY ANY GLASS DUST. I HAVE SOLD HUNDREDS OF BAGS WITH NO COMPLAINTS. GLASSBLOWERS USE THIS DICHRO GLASS FOR MAKING MARBLES, GLASS BEADS, FLAMEWORK, LAMPWORK, FUSING. BEAD MAKERS AND FUSERS USE THIS 33 COE DICHROIC GLASS FOR BEADMAKING, SCULPTURES AND OTHER FUSED GLASS ITEMS. THIS DICHROIC BOROSILICATE CAN BE USED WITH BETHLEHEM TORCHES CARLISLE BURNERS AND ALL OTHER MAJOR BRANDS OF BURNERS. FLAMEWORKERS AND LAMPWORKERS USE THIS BOROSILICATE GLASS TO MAKE FLAME WORK AND LAMP WORK SCULPTURE. YOU ARE LIMITED ONLY BY YOUR IMAGINATIONS ON USES FOR THIS GLASS.


	Litton EE-P With Clutch to dissingage on Head $10000
e-mail jason harris jason@dichroic.us		e-mail jason harris jason@dichroic.us
Litton ESL-P? $12K

Litton K For $8000	Litton K For $8000

bead making	beadmaking	borosilicate	borosilicate glass
flame work	flamework	fusing glass	glass blowing
glass fusing	glassblowing	lamp work	lampwork
marble glass	marble making	paperweight glass	paperweight making
dichroic	DICHRO

GLASS BLOWING SUPPLIES	FUSING KILN SKUTT	ANNEALING KILN SKUTT	ANNEALING KILN AIM	GLASS LATHE
FUSING KILN AIM

	SOLD! $10,500 This is a Litton EE floor model lathe - Precision alignment - Infinitely variable-speed belt drive - Spindle On/Off, speed and direction controls - Jog button - Sockets to accommodate remote control devices - Seals on lathe spindles that make it possible to apply air pressure to the work - Optional swivel/stop system used to deliver both pressure and vacuum directly to the work. Can accommodate different size stops